Table of Contents
Advertisement
TQ6702e GEN2 Outdoor Access Point Installation Guide
Vertical Pole and
Horizontal Pole
Guidelines for
Pole Installation
58
Your can install the access point on a pole that stands vertically or runs
horizontally.See Figure 31.
For the orientations of the access point, see Figure 26 on page 51.
Figure 31. Pole Orientations for the Access Point
Note
Figure 31 shows the pole orientations using the pole straps and
mounting base as examples. You can also install the access point
on a vertical or horizontal pole using the U-bolts and pole-mount
bracket.
Review the following guidelines before installing the access point on a
pole:
The U-bolts can hold the pole whose diameter is from 35mm to 55mm.
The pole straps can hold the pole whose diameter is from 80mm to
100mm.
The pole-mount bracket has two hex-head bolts that allow you to
adjust the angle of the access point upwards or downwards.
The access point can be installed on a pole that stands vertically or
runs horizontally using either the U-bolts and pole-mount bracket or
the pole straps and mounting base. See Figure 31 on page 58.
Advertisement
Table of Contents
