TQ6702e GEN2 Outdoor Access Point Installation Guide
Attaching the Cables to the TQ0301 Patch Antenna
78
Allied Telesis offers two types of cables for the TQ0301 patch antenna:
Two meter cable: comes with the TQ0301
TQ0064 Ten meter cable
To attach the cables to the TQ0301 patch antenna, perform the following
procedure:
1. Remove the connector blind caps covering the antenna connectors.
2. Attach the N-Jack adapters to the two meter cables.
Note
If you are attaching the TQ0064 10 meter cable, skip this step.
3. Screw the cables to the antenna connectors. See Figure 42.
Figure 42. Attaching the Cables to the Antenna Connectors