Figure 14: Installing The Sealing Insert; Figure 15: Inserting The Sealing Insert In The Clawing Clamp - Allied Telesis TQ6702e GEN2 Installation Manual

TQ6702e GEN2 Outdoor Access Point Installation Guide
Groove
Figure 14. Installing the Sealing Insert
6. Slide the sealing insert into the clawing clamp. Refer to Figure 15.
Figure 15. Inserting the Sealing Insert in the Clawing Clamp
7. Connect the RJ-45 connector on the Ethernet cable into the Ethernet
LAN port inside the sealing assembly. Refer to Figure 16 on page 45.
44