Ethernet Cable
Requirements
Maximum
Distance
You can use the reset button to return the parameter settings of the device
to their default values. You might reset the access point if you want to
discard its current configuration or because you forgot the password to the
manager account and so cannot manage the device.
To reset the device, remove the transparent cap on the front panel and
press the black button for five seconds and release.
You can enable or disable the reset button with the management software.
The default setting is disabled. If the access point is installed in a public
area, you probably should leave it disabled to protect the device from
being reset by unauthorized individuals.
The minimum cable requirements for the Ethernet LAN port are listed
here.
100Mbps - Standard TIA/EIA 568-A-compliant Category 5 or
TIA/EIA 568-B-compliant Category 5 unshielded cabling.
1000M/2.5G/5Gbps - Standard TIA/EIA 568-A-compliant
Enhanced Category 5 (Cat 5e) or TIA/EIA 568-B-compliant
Enhanced Category 5 (Cat 5e) unshielded cabling.
The LAN port has a maximum operating distance of 100 meters (328 feet).
Chapter 1: Product Description
29