Setting The Location; Figure 40: Basic Settings For Radio1 - Allied Telesis TQ6702e GEN2 Installation Manual

TQ6702e GEN2 Outdoor Access Point Installation Guide
Setting the
Location
70
2. Select the Country pull-down menu and select your country or region.
Note
If the Country pull-down menu is deactivated and cannot be
changed, the country parameter was set when the unit was
manufactured. If the setting is not correct for your country or region,
contact your Allied Telesis sales representative for assistance.
The access point displays a confirmation prompt.
3. Click OK to change the country setting or Cancel to cancel the
procedure.
If you click OK, the access point changes the country setting and
disables all radios on the access point.
Note
This procedure does not require clicking the Save & Apply button.
To change the location to indoor or outdoor, perform the following
procedure:
1. Select Settings > Radio from the menu on the left.
The access point displays the Basic Settings for Radio 1. See
Figure 39.
Figure 40. Basic Settings for Radio1