Table of Contents
Advertisement
The components are listed in Table 2.
Component
Four 5GHz Antenna
Connectors
Four 2.4G/5GHz
Antenna Connectors
LAN Port (PoE++
Input)
Three LEDs
Reset Button
Gore® vent
LAN Port
The TQ6702e GEN2 access point has one Ethernet LAN port on the front
panel. The port has two functions. The first is to connect the wireless
clients to your wired Local Area Network (LAN). The second is to receive
power for the product from a PoE++ source device. The access point does
not have an internal power supply and it does not support an external
power adapter. It has to be powered from a PoE++ source device on this
port. Refer to Figure 3 on page 26.
Table 2. Components of the Access Point
N-type female connectors for the 5GHz antennas
N-type female connectors for the 2.4G/5GHz
dual-band antennas
The LAN port is a standard 100M/1000M/2.5G/5G
Ethernet port. The port is used to connect the
access point to your local area network and to
provide power to the device from a PoE++ source
device. The access point has to be powered by a
PoE++ source device. Refer to "LAN Port" on
page 25.
The access point has the following LEDs:
Refer to "LEDs" on page 27.
The reset button returns the access point to its
default settings. Refer to "Reset Button" on
page 28.
The vent equalizes housing pressures, protects
against dirt, dust, humidity and water, and reduces
condensation.
Note
Do not remove the Gore® vent plug from the access point.
Description
LAN - Displays status information about
the Ethernet LAN port.
WLAN - Displays status information about
the radios.
Power - Displays status information about
PoE++.
Chapter 1: Product Description
25
Advertisement
Table of Contents
