Figure 12: Sealing Nut, Clamping Claw, And Sealing Insert; Figure 13: Sliding The Ethernet Lan Cable Through The Sealing Nut And Clamping Claw - Allied Telesis TQ6702e GEN2 Installation Manual

Outdoor wireless access point

Hide thumbs Also See for TQ6702e GEN2:

Table of Contents

3. Disassemble the sealing nut, clamping claw, and sealing insert. Refer

to Figure 12.

Figure 12. Sealing Nut, Clamping Claw, and Sealing Insert

4. Slide the Ethernet LAN cable through the sealing nut and clamping

claw. See Figure 13. The fingers on the clamping claw need to be

pointing towards the sealing nut.

Figure 13. Sliding the Ethernet LAN Cable Through the Sealing Nut and

5. Open the sealing insert and slip it onto the Ethernet wire. The end with

the groove needs to be towards the clamping claw.Refer to Table 14

on page 44.

Chapter 2: Installing the Access Point

Clamping

Claw

Sealing Nut

Clamping Claw

Sealing

Insert

Clamping

Claw

Fingers

Table of Contents