Thermal Optical Bi-spectrum Network Camera User Manual
Restore Reset device parameters, except user information, IP parameters and video format
to the default settings.
Default
Reset all the parameters to the factory default.
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.
10.8 Upgrade
Before You Start
You need to obtain the correct upgrade package.
Caution
DO NOT disconnect power during the process, and the device restarts automatically after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Choose one method to upgrade.
Firmware
Firmware Directory Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
10.9 View Open Source Software License
Go to Configuration → System → System Settings → About , and click View Licenses.
10.10 Time and Date
You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).
10.10.1 Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings .
2. Select Time Zone.
3. Click Manual Time Sync..
Note
Locate the exact path of the upgrade file.
79