Set Same Unit; Power Consumption Mode - HIKVISION DS-2TXS2628-10P/QA/GLT/CH36S80 User Manual

Thermal Optical Bi-spectrum Network Camera User Manual

10.12 Set Same Unit

Set the same temperature unit and distance unit. When you enable this function, the unit cannot
be configured separately in other setting pages
Steps
1. Go to Configuration → System → System Settings → Unit Settings .
2. Check Use Same Unit.
3. Set the temperature unit and distance unit.
4. Click Save.

10.13 Power Consumption Mode

It is used for power saving.
Note
The function is only supported by certain camera models.
Go to Configuration → System → System Settings → Power Consumption Mode , select the
desired power consumption mode.
Power Consumption Mode
Performance Mode
The device works with all the functions enabled.
Proactive Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview, and the configuration.
Check Power Saving Control. It is used to set power off schedule for thermal or optical
channel.
Sleep Settings
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 20% above the threshold, the device enters the user
configuration mode.
Scheduled Sleep
During Scheduled Sleep Time, it enters the sleep mode, otherwise it enters the user
configuration mode.
73