Table of Contents
Advertisement
Chapter 2 Front Panel Operations
You can also use the Left arrow key to locate the cursor to the left side of the user
interface, and then rotate the knob to select the "Arb File" or the "State File"
folder. Press down the knob to enter the current directory.
File Operation
In the Disk C or D (when inserted with a USB storage device), you can perform a
series of operations on the files, including Save, Read, Copy, Paste, and Delete.
Save
1. To Select the Save Path
Selects Disk C or D (when inserted with a USB storage device) as the current
save path.
You can tap Disk C or D to enter the current directory. You can also use the Left
arrow key to locate the cursor to the left side of the user interface, and then
rotate the knob to select Disk C or D. Press down the knob to enter the current
directory.
Only the state file and the arb file can be saved locally. If the current file is "Arb
File", press the Shift key first and the backlight turns on. Then press
Home/Menu → Advanced → "Sequence". In the Sequence editing interface,
tap "Store" to save the file.
2. To Open the Filename Input Interface
After selecting the path, tap Save to enter the filename input interface, as
shown in the following figure.
DG2000 User Guide
Filename Input Area
Figure 2-19 Filename Input Interface (English)
RIGOL
2-75
Advertisement
Table of Contents
