Triggering the Oscilloscope
Trigger Type
Click or tap the drop-down button of Type to select "Nth Edge".
After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
HDO1000 User Guide
96
M
P<Idle Time<M
Figure 8.22 Nth Edge Trigger
Figure 8.23 Nth Edge Trigger Setting Menu
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Edge Type=
Edge Num=2
P