Reception Check Interval Setting; Anti Junk Mail/Domain Name Setting; I-Fax Output Setting - Sharp MX-5500N User Manual

Reception Check Interval Setting

This is used to specify the interval at which the machine
automatically checks the mail server (POP3 server) for
received Internet faxes. The interval can be set from 0
minutes to 8 hours in increments of 1 minute.
When 0 hours 0 minutes is specified, the machine does
not automatically check the mail server for received
Internet faxes.
The machine also checks the mail server (POP3
server) for received Internet faxes when the main
power is switched on. (Except when 0 hours 0 minutes
is specified.)

I-Fax Output Setting

This sets the output tray for received Internet faxes.
The items that appear will vary depending the machine
configuration.
Anti Junk Mail/Domain Name
Setting
This setting is used to allow or refuse reception from
specified addresses/domains.
Item
Reject Reception from the stored
Reception address/domain is not allowed.
Allow Reception from the stored
Reception address/domain is allowed.
Reception from any address and domain
is allowed, regardless of whether or not
All Invalid
any addresses or domains have been
stored.
Use this to add a new address or domain
(maximum of 50) from which reception is
to be rejected or allowed.
If the first character of the entry is not
"@", the entry is identified as an address.
If the first character is "@", the entry is
Add New
identified as a domain. (xxx@xx.xxx.com
is treated as an address, and
@xx.xxx.com is treated as a domain.)
Storing an address specifies only that
address. Storing a domain specifies all
addresses that include that domain.
This shows a list of the stored addresses
Registration
and domains. An address or domain can
Number
be selected in this screen to delete it from
List
the list.
When there are no stored anti junk mail addresses,
only the [Add New] key can be selected.
81
Description