Sharp MX-5500N User Manual page 373

(1)
2-Sided Copy
3
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
Color Mode
Full Color
Exposure
Auto
4
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
6
Special Modes
Plain
8½x11
1. 2.
8½x11 8½x11
3. 11x17
4. 8½x14
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Special Modes
2-Sided Copy
Plain
8½x11
) and then enter the correct number.
or
Select the 2-sided copy mode.
(2)
(1) Touch the [1-Sided to 2-Sided] key.
OK
(2) Touch the [OK] key.
Binding
Change
Check the paper to be used and the
color mode.
2-Sided Copy
Make sure that the desired paper (tray) and color mode are
Output
selected.
File • To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
Quick File
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
Set the number of copies (number of
7
sets) with the numeric keys.
Press the [COLOR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
22
(page 14)
(page 24)
)