Sharp MX-5500N User Manual page 535

6
Set the paper size and paper type.
Be sure to change the paper size and paper type settings as explained in "Paper Tray Settings" in the System Settings Guide.
7
If the paper size setting is not configured correctly, automatic paper selection will not operate correctly and printing may take
place on the wrong size or type of paper or a misfeed may occur.
Do not place heavy objects on the tray or press down on the tray.
System Settings: Paper Tray Settings
Change these settings when you change the size or type of paper loaded in a tray.
Change the right paper guide to the
paper size to be used.
(1) While holding up the paper guide lock, slide
the paper guide to the paper size to be
used.
(2) Release the paper guide lock.
(3) Move the paper guide slightly to the right
and left so that it locks into place.
You will hear a "click" when the paper guide locks.
37