System Settings (General); Accessing The System Settings (General) - Sharp MX-5500N User Manual

2

SYSTEM SETTINGS (GENERAL)

This chapter describes the system settings that can be configured by general users of the machine.

Accessing the System Settings (General)

HOME
SYSTEM
SETTINGS
READY
PRINT
DATA
LINE
IMAGE SEND
DATA
JOB STATUS
System Settings
Total Count Default Settings
Paper Tray
Address Control
Settings
Document Filing
Printer Condition
Control
Settings
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see "USER AUTHENTICATION" in the User's Guide.
LOGOUT
Admin Password Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
8