Sending A Fax In Internet Fax Mode - Sharp MX-5500N User Manual

SENDING A FAX IN INTERNET FAX MODE

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the
[Cancel] key in the touch panel and follow the steps below.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
orientation (
manually.
• Image rotation
8-1/2" x 11" and 5-1/2" x 8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
1
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. (8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.)
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R, B5R to
B5, and A5R to A5).
(1) (2)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings
Resolution
Address Review File Format
Special Modes
File
2
Quick File
The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To
change a setting, touch the appropriate key.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
EXPOSURE MODE (ORIGINAL IMAGE TYPE)
CHANGING THE FILE FORMAT
Original size
detector
), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size
Fax USB Mem. Scan PC Scan
8½x11
Scan: Auto Send: Auto
Auto
200X100dpi
TIFF-F
I-Fax Manual
Reception
(page 65),
Place the original.
• Place the original face up in the document feeder tray, or
face down on the document glass.
• Do not place any objects under the original size detector.
Closing the automatic document feeder with an object
underneath may damage the original size detector plate and
prevent correct detection of the document size.
Transmission
Switch to Internet fax mode and display
the image settings screen.
(1) Touch the [Internet Fax] tab.
(2) Touch the [Original] key.
(page 56),
(page 62), CHANGING THE RESOLUTION
4. SPECIAL MODES (page 70)
42
). If placed in landscape (horizontal)
(page 55), SPECIFYING THE
CHANGING THE EXPOSURE AND
(page 64),