System Settings for Fax (Administrator) List
When the system settings for fax are accessed with administrator rights, the following items appear. For information on
the general settings, see
• For the procedure for using the system settings (administrator), see
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
■ Image Send Settings
■
Image Send Settings
●
Fax Settings
Fax Default Settings
Fax Own Name and Number Set
Dial Mode Setting
Auto Wake Up Print
Pause Time Setting
Speaker Settings
• Speaker
• Ringer Volume
• Line Monitor
• Fax Receive Complete Signal
• Fax Send Complete Signal
• Fax Communication Error Signal
• Speaker Volume Details Setting
Remote Reception Number Setting
Original Print on Transaction Report
"System Settings for Fax (General)
Item
List" (page 93).
"Accessing the System Settings
Factory default setting
–
Tone
Enabled
2 sec.
Volume: Middle
Volume: Middle
Volume: Middle
Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 0.3 sec. each
Speaker / Line Monitor
Small: 3, Middle: 6, Big: 8
Ringer Volume / Reception End
Signal / Transmission End Signal /
Fax Communication Error Signal
Small: 2, Middle: 4, Big: 8
5
Print Out Error Report Only
99
(Administrator)" (page 29).
Page
101
101
101
101
101
101
101
101
101
102