Changing The Print Settings For The Transaction Report (Transaction Report) - Sharp MX-5500N User Manual

CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction
Report)
A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast
transmission is performed. The transaction report contains a description of the transmission (date, start time, name of
other party, time required, number of pages, result, etc.).
☞
INFORMATION APPEARING IN THE RESULT COLUMN
This function cannot be used in scan mode, USB memory mode, or data entry mode.
Transaction reports are printed based on conditions set in the system settings; however, you can temporarily select
different conditions for a transmission. To change the transaction report print conditions at the time of transmission,
follow the steps below.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Internet Fax] tab.
(2) Touch the [Special Modes] key.
2
(3) Touch the
(4) Touch the [Transaction Report] key.
☞
SPECIAL MODES
Internet Fax/Special Modes
Transaction Report
3
Always Print
Print Original Image
When the [Print Original Image] checkbox is selected
transaction report.
keys to switch through the screens.
(page 70)
(1) (2)
Cancel
Print at Error Do not Print
(page 107)
Select print conditions.
(1) Select the print conditions.
OK
OK
(2) Touch the [OK] key.
, part of the transmitted original is included on the
97