System Bar - Sharp MX-5500N User Manual

SYSTEM BAR

The system bar appears at the bottom of the touch panel.
The items that appear in the system bar are explained below.
(1) Job status display
The first four jobs in progress or reserved are indicated
by icons. The icons are as follows.
Print job
Scan to E-mail
job
Scan to
Network Folder
job
Fax
transmission
job
PC-Fax
transmission
job
Internet Fax
reception job
Broadcast job
Tandem
copy/print job
Color Mode
Full Color
Exposure
1. 2.
8½x11 8½x11
Auto
3. 11x17
4. 8½x14
Copy Ratio Original
100%
Auto
8½x11
Printing
(A) (1)
Copy job
Scan to FTP job
Scan to
Desktop job
Fax reception
job
Internet fax
transmission
job
PC-I-Fax
transmission
job
Scan to HDD
file print job
14
Special Modes
2-Sided Copy
Plain
8½x11
Output
File
Quick File
Paper Select
Auto
8½x11
Plain
(2) (3)
The status of the first job is indicated as shown in (A).
The color appearing in the job status display depends on
the job status as indicated in the table below.
The job status display can be touched to show the job
status screen.
Job status
display
A print, scan or other job is being
Green
executed normally.
The machine is warming up or on
Yellow
standby, or a job is being canceled.
A paper misfeed or other error
Red
condition has occurred.
Gray The machine has no jobs.
(2) USB device display
This appears when a USB memory or other USB device
is connected to the machine.
(3) Brightness adjustment key
Touch this key to adjust the brightness of the touch
panel.
When touched, the following screen appears next to the
key.
Touch the [+] key or the [-] key to adjust the brightness.
When finished, touch the brightness adjustment key
again to close the screen.
Machine Configuration