Sharp MX-5500N User Manual page 216

Scan/Original
Auto 8½x11
Manual
5½x8½
3
5½x8½R 8½x13(216x330)
8½x11
Size Input
Scan/Original
Size Input
4
System Settings (Administrator): Original Size Detector Setting
This is used to set the size entry screen to "inch units" or "mm units".
Scan/Original
Scan Size
X17 Y11
5
2-Sided 2-Sided
Booklet Tablet
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer than 17" (432 mm) can be scanned (maximum width
31-1/2" (800 mm)). In this case, touch the [Long Size] key in the screen of step 3.
☞
Specifying the original scan size (by paper size)
8½x11R 11x17
Long Size
8½x14
(1), (2)
Cancel
X 17
(2 1/2 17)
inch
Y 11
(2 1/2 11 5/8)
inch
Send Size
Auto
Image Orientation
Touch the [Size Input] key.
OK
AB
Inch
Enter the scan size (original size).
(3)
(1) Touch the [X] key and enter the X
OK
(horizontal) dimension with the
OK
(2) Touch the [Y] key and enter the Y (vertical)
dimension with the
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete
the setting and return to the screen of step 3.
Touch the [OK] key.
OK
The specified size appears in the [Scan Size] key.
(page 57)
59
keys.
keys.