Performing "Scan To Hdd - Sharp MX-5500N User Manual

PERFORMING "Scan to HDD"

1
(4) (2)
COPY IMAGE SEND
Ready to scan to HDD.
Press [Start] to scan original.
File Retrieve Scan to HDD
File
Original
Information
Exposure
Resolution
2
Comp. Ratio
Color Mode
Special Modes
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
3
To cancel scanning...
Press the [STOP] key (
When Scan to HDD is performed without appending file information, the following user name and file name are automatically
assigned to the file.
User Name: User Unknown
File Name: Mode_Month-Day-Year_Hour-Minute-Second
(Example: HDD_04012006_112030AM)
Stored to: Main Folder
When user authentication is used, the user name that was used for login is automatically selected.
(1) (3)
DOCUMENT
FILING
HDD Status Ex Data Access
Auto 8½x11 Auto
Scan: Store:
Auto Text
200X200dpi
Medium
Auto
Mono2
or
).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Switch to document filing mode and
select Scan to HDD settings.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Scan to HDD] tab.
If you do not wish to select settings, go to the next step.
(3) Select the original size, exposure,
resolution, compression ratio, color mode,
and special modes.
See ""Scan to HDD"
(4) Touch the [File Information] key.
The settings are the same as for "File". See
INFORMATION" (page 17).
Press the [COLOR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
For the procedure for placing the original, see step 4 of
"SAVING A FILE WITH "Quick
A beep will sound to indicate that Scan to HDD is completed.
24
SCREEN" (page 20).
"FILE
File"" (page 13).
)