Paper Tray Settings; Tray Settings; Item; Tray - Sharp MX-5500N User Manual

Paper Tray Settings

Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the
settings.

Tray Settings

These settings specify the paper type, paper size, and functions allowed for each paper tray.
When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Settings of each tray
Touch the [Change] key in the above screen to change the settings.
The following settings can be configured.

Item

Type
Size
Feeding Approved Job
• If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result
when printing.
To change the paper size in a tray, see "User's Guide".
• Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray
properties cannot be changed in this screen.
• If "Disabling of Tray
for the bypass tray) cannot be configured.

Tray Settings

Type

Tray 1

Size
Fixed Paper Side Disable Duplex
Copy Print
Type
Tray 2
Size
Fixed Paper Side Disable Duplex
Copy Print
Select the type of paper that is loaded in the tray.
The paper types that can be selected vary by paper tray. For more information, see
"Tray Settings" (page 17).
To store a new paper type, see
Select the paper size from the list. The paper sizes that can be selected vary by tray.
The sizes that can be selected may also be restricted by the paper type selected
above. For more information, see
If the desired size does not appear in the list, select [Custom Size] and directly enter
the size (only for tray 3 and the bypass tray). For more information, see
Settings" (page 17).
Select the modes that can be used. If there is a function that you do not wish to be
used with the selected tray, disable the function.
When the "Type" is other than plain paper, recycled paper, colored paper, or a user
type, [Fax] and [Internet Fax] cannot be selected.
Setting" (page 64) has been enabled in the system settings (administrator), the tray settings (except
Plain
Change
8-½x11
Disable Staple Disable Punch
Fax I-Fax Doc. Filing
Plain
Change
8-½x11
Disable Staple Disable Punch
Fax I-Fax Doc. Filing
Description
"Paper Type
"Tray
16
Back
Registration" (page 18).
Settings" (page 17).
"Tray