Copying Sequence - Sharp MX-5500N User Manual

COPYING SEQUENCE

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this manual.
Color Mode
Full Color
Exposure
Auto
Copy Ratio
Original
100%
2-Sided Copy
Basic copy settings
Special Modes
2-Sided Copy
Plain
8½x11
1. 2.
8½x11 8½x11
11x17
3.
8½x14
4.
Quick File
Paper Select
Auto
Auto
8½x11
8½x11
Plain
2-sided copy settings
Place the original.
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
* Depending on the copy functions used, there are also cases
where functions are selected before the original is placed.
Select the basic copy settings.
The main settings are as follows:
• Color mode
• Exposure and original type
Output
EXPOSURE AND ORIGINAL IMAGE TYPE
File • Copy ratio
• Original size
• Paper Settings
Select settings as needed for 2-sided copying and 2-sided
OK
scanning of the original.
☞
AUTOMATIC 2-SIDED COPYING
9
☞
COPY COLOR MODES
☞
CHANGING THE
☞
REDUCTION/ENLARGEMENT/ZOOM
(page 28)
☞
ORIGINAL SIZES (page 32)
☞
PAPER TRAYS (page 14)
(page 24)
(page 26)
(page 19)