Settings
Item
Program Number
Program Name
Address
Address Book screen
Address Review
Address Mode Setting
Mode Settings
Set the number to be assigned to the program. The lowest available number is
automatically entered. To change the number, enter a number from 01 to 48. A
number that has already been stored cannot be used.
Enter a maximum of 36 characters for the program name.
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program. (If a Scan to Network Folder destination
is selected, only one destination can be stored.)
This displays a list of the currently stored addresses.
This displays a list of the selected addresses. Addresses can be deleted from this list
if needed.
Select the mode in which the address is used (Internet fax, scan, etc.) When a mode
is selected, the settings for that mode appear.
Frequently used settings can be stored in the same way as when they are selected
for a mode. For more information, see the manuals for each mode.
22
Description