Sharp MX-5500N User Manual page 424

(2)
Special Modes
Transparency Inserts
Paper Tray
(A)
Tray2
8½x11
(B)
Plain
4
Select insert paper that is the same size as the transparency film.
5
To cancel scanning and copying...
Press the [STOP] key (
• The number of copies cannot be selected in this mode.
• When performing 2-sided copying, only "2-sided to 1-sided" mode can be used.
To cancel the transparency inserts setting...
Touch the [Cancel] key in the screen of step 4.
(1) (3)
OK
Cancel OK
Print on Insert Sheets
Yes No
or
).
Select insert settings.
(1) Select whether or not the insert paper will
be copied on ([Yes] or [No]).
(2) Select insert paper settings.
(A) The currently selected paper tray for the inserts is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the inserts, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the paper tray for the inserts in the
tray selection screen and touch the [OK] key.
Transparency Inserts
Insertion Sheet
Inserter
8½x11
Plain
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
Press the [COLOR START] key (
or the [BLACK & WHITE START] key
( ).
Copying will begin.
73
Paper Tray Bypass Tray
1. 8½x11 2. 8½x11
Plain
Plain
Transparency
3. 11x17 Plain
4. 8½x14 Plain
OK
8½x11
)