Erasing Peripheral Shadows On The Image (Erase) - Sharp MX-5500N User Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function
erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the
shadows.)
Scanning a thick book
Shadows appear here
Erase modes
Edge Erase
• Shadows at the edges of the original can also be erased when the automatic document feeder is used.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
2
(2) Touch the [Special Modes] key.
(3) Touch the [Erase] key.
☞
SPECIAL MODES (page 70)
Not using the erase
function
Shadows appear in the
image.
Center Erase
74
Using the erase
function
No shadows appear.
Edge + Center Erase