Advertisement
Quick Links
Kangaroo™ ePump Enteral Feeding Pump
User Guide (Feed Only Mode)
Pump Set Loading Procedure.
1. Locate power button on lower
right hand corner of control panel.
Press to turn pump on.
3. With pump display facing you
open blue door on right hand side
of pump.
5. Grasp black ring retainer, and gently
wrap tubing anti-clockwise around
rotor. Pull up retainer and insert
into slot.
2. Confirm if you want to KEEP or
CLEAR any prior pump settings.
4. Grasp finger tab on valve and insert
valve into valve slot on the left.
6. Close blue door. Display
should read SET LOADED.
Advertisement
Related Manuals for Cardinal Health Kangaroo ePump
Summary of Contents for Cardinal Health Kangaroo ePump
- Page 1 Kangaroo™ ePump Enteral Feeding Pump User Guide (Feed Only Mode) Pump Set Loading Procedure. 2. Confirm if you want to KEEP or 1. Locate power button on lower CLEAR any prior pump settings. right hand corner of control panel. Press to turn pump on. 3.
- Page 2 Set Priming and Pump Programming Procedure. 1. Press PRIME PUMP followed by 2. Press ADJUST FEED followed AUTO PRIME to automatically by FEED RATE to adjust hourly prime or HOLD TO PRIME to delivery rate. manually prime set. Press DONE when complete.
- Page 3 46 cm 5. Press buttons on left to program volume of feed to be delivered. Press ENTER to confirm rate. 7. In order to achieve proper accuracy the bottom 6. Press DONE to return to main of the feeding set container must be 46 cm screen and then press RUN to above the top of the feeding pump.
- Page 4 © 2019 Cardinal Health. All Rights Reserved. CARDINAL HEALTH, the Cardinal Health LOGO and ESSENTIAL TO CARE are trademarks of Cardinal Health and may be registered in the US and/or in other countries. All other marks are the property of their respective owners. 1435-03-19...
Need help?
Do you have a question about the Kangaroo ePump and is the answer not in the manual?
Questions and answers