Emergency Stop; Articulated/Steering Joint - Lubrication - Fayat Group Dynapac CA30D Instruction Manual

Vibratory roller
Hide thumbs Also See for Dynapac CA30D:
Table of Contents

Advertisement

Fig. Control panel
1.

Emergency Stop

1
1
Fig. Steering cylinder lubrication
1.
Points of cylinder lubrication
1
1
Fig. Steering cylinder lubrication
1.
Points of cylinder lubrication
(4 points)
01-06-2022
Maintenance – Planned maintenance
Emergency stop
Drive the machine slowly forward. Hold the steering wheel firmly
and brace yourself for a sudden stop.
Press the emergency stop (1). The machine will stop abruptly
and the engine will be switched off.
After testing the brakes, set the forward/reverse lever in neutral.
Pull out the emergency stop (1).
1
Turn on the engine.
The machine is ready for operation.
Articulated/Steering joint – Lubrication
Presence
articulation when the engine is running is not
permitted. Danger of being crushed when
steering
emergency/parking brake before lubricating.
Clean the dirt and grease from the lubrication points.
Use the lubrication grease according to lubricant specifications.
Use specific grease on the articulated joint.
Apply the lubrication grease (5 strokes) in each
lubrication point
Make sure that grease penetrates into the bearings.
If grease does not penetrate the bearings, it may be
necessary to relieve the articulation joint with a hydraulic
jack while repeating the greasing process.
4812134740EN
of
people
near
is
operated.
the
steering
Apply
the
88

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac ca30pd

Table of Contents