Display Ip Routing-Table Ip-Address1 Ip-Address2 - H3C S3100-52P Command Manual

Command Manual – Routing Protocol
H3C S3100-52P Ethernet Switches
# There is no corresponding route in the natural mask range (only the longest matched
route is displayed). Display the detailed information.
<H3C> display ip routing-table 169.253.0.0 verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both
Summary count:1
**Destination: 169.0.0.0
For detailed description of the output information, see Table 1-2.
1.1.3

display ip routing-table ip-address1 ip-address2

Syntax
display ip routing-table ip-address1 mask1 ip-address2 mask2 [ verbose ]
View
Any view
Parameter
ip-address1, ip-address2: Destination IP address in dotted decimal notation.
ip-address1, mask1 and ip-address2, mask2 determine one address range together.
ip-address1 ANDed with mask1 specifies the start of the range, while ip-address2
ANDed with mask2 specifies the end. This command displays the route in this address
range.
mask1, mask2: IP address mask, length in dotted decimal notation or expressed as an
integer. It ranges from 0 to 32 when expressed as an integer.
verbose: With the verbose argument provided, this command displays the verbose
information of both active and inactive routes. Without this argument provided, this
command displays the summary of active routes only.
Description
Use the display ip routing-table ip-address1 ip-address2 command to display the
route information in the specified destination address range.
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Gateway Static Unicast>
Age: 4:49 Cost: 0/0
Protocol: #Static
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0
Chapter 1 IP Routing Table Display Commands
Interface: 2.1.1.1(LoopBack1)
Tag: 0
* = Next hop in use
Mask: 255.0.0.0
Preference: -60
Interface: 2.1.1.1(LoopBack1)
Tag: 0
1-4