Table 3-15: Pso Specifications [-Eb1]; Table 3-16: Pso Interface Connector Pinout [-Eb1]; Table 3-17: Pso Interface Mating Connector Ratings [-Eb1] - Aerotech Automation1 iXC4e Hardware Manual

Hardware Manual
3.5. PSO Interface [-EB1]
The Position Synchronized Output (PSO) signal is available on the -EB1 option board in two signal
formats: TTL and Isolated.
The PSO signal is also available on the AUX I/O connector. Refer to
Table 3-15: PSO Specifications [-EB1]
Specification
Output
Maximum PSO Output (Fire) Frequency
Output Latency
[Fire event to output change]
Table 3-16: PSO Interface Connector Pinout [-EB1]
Pin # Description
1 PSO Output+
2 PSO Output-
3 PSO Output (TTL)
4 Ground
Table 3-17: PSO Interface Mating Connector Ratings [-EB1]
Specification
Type
Part Numbers
Conductor Cross
Section
Conductor Insulation Strip Length
(1) Refer to the manufacturer website for additional information.
www.aerotech.com
Solid or stranded
Stranded, with ferrule, without
plastic sleeve
Section 2.5.2.
TTL
Isolated
TTL
Isolated
TTL
Isolated
In/Out/Bi
Output
Output
Output
N/A
4-Pin Terminal Block
Aerotech: ECK02399
Phoenix: 1768004
20...26 AWG (0.14...0.5 mm
20...24 AWG (0.25...0.5 mm
iXC4e/XC4e
Value
5 V, 16 mA (max)
5-24 V, 250 mA
12.5 MHz
5 MHz
5 ns
150 ns
Connector
Description
2
)
2
)
8 mm (5/16 in)
99