Figure 2-47: Analog Output 0 Schematic; Table 2-46: Analog Output Specifications; Table 2-47: Analog Output Pins On The Auxiliary I/O Connector - Aerotech Automation1 iXC4e Hardware Manual

iXC4e/XC4e
2.5.6. Analog Output 0
The analog output can be set from within a program or it can be configured to echo the state of
select servo loop nodes.
The analog output is set to zero when you power on the system or reset the drive.
Table 2-46: Analog Output Specifications
Specification
Output Voltage
Output Current
Resolution (bits)
Table 2-47: Analog Output Pins on the Auxiliary I/O Connector
Pin# Description
22 Analog Output 0
23 Analog Common
Figure 2-47: Analog Output 0 Schematic
78
Hardware Manual
Value
-10 V to +10 V
5 mA
16 bits
In/Out/Bi
Output
Output
www.aerotech.com