iXC4e/XC4e
2.6. Brake Power Supply Connector
This port is the power supply connection to the on-board brake control circuit. Refer to
for more information about the brake output interface.
Table 2-50:
Brake Power Supply Connector Pinout
Pin# Description
1
Brake Power Supply (+)
2
Brake Power Supply (-)
Table 2-51:
Brake Power Supply Mating Connector Ratings
Specification
Type
Part Numbers
Conductor Cross
Section
Tightening Torque
Conductor Insulation Strip Length
(1) Refer to the manufacturer website for additional information.
80
One conductor, stranded with ferrule
and plastic sleeve
Two conductors (same cross-
section), stranded, twin ferrule with
plastic sleeve
Hardware Manual
Section 2.3.6.
Connector
In/Out/Bi
Input
Input
Description
2-Pin Terminal Block
Aerotech: ECK02391
Phoenix: 1827635
18...22 AWG (0.25...0.75 mm
2
20 AWG (0.5 mm
)
0.22...0.25 N·m
7 mm (0.25 in)
www.aerotech.com
2
)