Table of Contents
Advertisement
Hardware Manual
Handling and Storage
Unpacking the drive
IMPORTANT: All electronic equipment and instrumentation is wrapped in antistatic
material and packaged with desiccant. Ensure that the antistatic material is not
damaged during unpacking.
Inspect the shipping container for any evidence of shipping damage. If any damage exists, notify the
shipping carrier immediately.
Remove the packing list from the shipping container. Make sure that all the items specified on the
packing list are contained within the package.
The documentation for the drive is on the included installation device. The documents include
manuals, interconnection drawings, and other documentation pertaining to the system. Save this
information for future reference. Additional information about the system is provided on the Serial
and Power labels that are placed on the chassis.
The system serial number label contains important information such as the:
Customer order number (please provide this number when requesting product support)
l
Drawing number
l
System part number
l
Handling
IMPORTANT: It is the responsibility of the customer to safely and carefully lift and
move the drive.
Be careful when you move or transport the drive.
l
Refer to
l
cifications.
Retain the shipping materials for future use.
l
Transport or store the drive in its protective packaging.
l
WARNING: Electrostatic Discharge (ESD) Sensitive Components!
You could damage the power supply or drives if you fail to observe the correct
ESD practices.
Wear an ESD wrist strap when you handle, install, or do service to the system assembly.
Storage
Store the drive in the original shipping container. If the original packaging included ESD protective
packaging, make sure to store the drive in it. The storage location must be dry, free of dust, free of
vibrations, and flat.
Section 1.3. Environmental Specifications
Refer to
www.aerotech.com
Section 1.2. Mechanical Specifications
for dimensions and weight spe-
.
iXC4e/XC4e
13
Advertisement
Table of Contents
