Figure 2-46: High-Speed Inputs; Table 2-44: High-Speed Input Specifications; Table 2-45: High-Speed Input Pins On The Auxiliary I/O Connector - Aerotech Automation1 iXC4e Hardware Manual

Hardware Manual
2.5.5. High-Speed Inputs
High-speed inputs 20 and 21 can be used as general purpose inputs or as the trigger signal for high
speed data collection. Refer to the
[A3200: DATAACQ TRIGGER
You can use the external
command] to synchronize waveform generation with an external synchronization signal. When you
activate this feature, the PSO Waveform module will not generate the configured waveform when an
output event is received until the rising edge of the synchronization signal occurs.
Table 2-44: High-Speed Input Specifications
Specification
Input Voltage
Input Current
Input Device
Delay
Table 2-45: High-Speed Input Pins on the Auxiliary I/O Connector
Pin# Description
3 High-Speed Input 20 + / PSO External Sync. +
4 High-Speed Input 20 - / PSO External Sync. -
5 High-Speed Input 21 +
6 High-Speed Input 21 -
Figure 2-46: High-Speed Inputs
www.aerotech.com
DriveDataCaptureConfigureTrigger() function
command] topic in the Help file for more information.
PSO synchronization functions [A3200: PSOOUTPUT PULSE EXTSYNC
Value
5V - 24 V input voltages
10 mA
HCPL-0630
50 nsec
iXC4e/XC4e
In/Out/Bi
Input
Input
Input
Input
77