Wi-Fi Connection To Sma 360° App And Sma Energy App; Led Signals - SMA Sunny Tripower X 12 Operating Manual

4 Product Overview
4.5.17 Wi-Fi connection to SMA 360° app and SMA Energy app
There is a QR code on the product by default. By scanning the QR Code attached to the product
via the SMA 360° app or SMA Energy app, access to the product is established via Wi-Fi and the
connection to the user interface is made automatically.
Also see:
• Direct connection via Wi-Fi ⇒ page 63
4.6

LED Signals

The LEDs indicate the operating state of the product.
LED signal
Green LED and red LED flash simultaneously (2
s on and 2 s off)
The green LED is flashing (2 s on and 2 s off)
The green LED is glowing
The green LED is off
The red LED is glowing
Red LED is flashing (0.25 s on, 0.25 s off,
0.25 s on, 1.25 s off)
28 STPxx-50-BE-en-11
Explanation
No country data set set
Operation of the product is stopped because no
country data set is set. The product automati-
cally starts operation as soon as the configura-
tion has been carried out (e.g. using the commis-
sioning wizard or via a System Manager).
Waiting for feed-in conditions
The conditions for feed-in operation are not yet
met. As soon as the conditions are met, the
product will start feed-in operation.
Operation
The product is in operation.
No DC voltage is present.
Error
Operation of the product has been stopped. In
addition, a specific event message and the asso-
ciated event number are displayed on the user
interface of the product or the System Manager
(e.g. SMA Data Manager) (see Section 11.1,
page 80).
Warning
Communication with the System Manager
failed. The inverter continues to operate with re-
stricted function (e.g., with set fallback level).
In addition, a specific event message and the as-
sociated event number are displayed on the
user interface of the product or the System Man-
ager (e.g. SMA Data Manager) (see Sec-
tion 11.1, page 80).
SMA Solar Technology AG
Operating manual