Mitsubishi Electric MELDAS C6 Parameter Manual page 61

# Items
1271 ext07 Cut amount
(PR) (bit7) (For L
system only)
1272 ext08 M function
(PR) (bit1) synchronous
tap cycle
1273 ext09
(PR)
1274 ext10
(PR)
1275 ext11
(PR)
1276 ext12
(PR)
1277 ext13 Tool life
(PR) (bit0) management
II count type
2
1278 ext14
(PR)
1279 ext15
(PR)
1280 ext16
(PR)
1281 ext17
(PR)
1282 ext18
(PR)
1283 ext19
(PR)
1284 ext20
(PR)
1285 ext21
(PR)
5. Base Specifications Parameters
Details
Specify the operation to be performed when the
program-specified cut amount exceeds the cut amount
of the final shaping program.
0: Conventional specifications
A program error occurs if the program-specified
cut amount exceeds the cut amount of the final
shaping program.
1: Extended specifications
Rough cutting is performed by one cut if the
program-specified cut amount exceeds the cut
amount of the final shaping program.
Specify whether to enable the M function synchronous
tap cycle.
0: Disable
1: Enable
Not used.
Not used.
Not used.
Not used.
Specify how and when the mount or use count is
incremented in tool life management II.
0: Type 1
The count is incremented when the spindle is
used for cutting.
1: Type 2
The count is incremented for the tool used or
mounted for one program. The increment is
enabled by resetting.
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
55
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0/1
(Default: 0)
0/1
0/1
(Default: 0)