Mitsubishi Electric MELDAS C6 Parameter Manual page 228

No. Items
3341 SP141 VGCI2
(PR)
3342 SP142 VGCD2
(PR)
3343 SP143 VGCP3
(PR)
3344 SP144 VGCI3
(PR)
3345 SP145 VGCD3
(PR)
3346 SP146 VGCP4
(PR)
3347 SP147 VGCI4
(PR)
3348 SP148 VGCD4
(PR)
8. Spindle Parameters
8.3 MDS-B-SP/SPH, MDS-C1-SP/SPH
Second Set the speed loop integral gain when the
speed loop second gain is selected for C-axis cutting.
gain integral
item for
cutting on
C-axis
Second Set the speed loop delay advance gain
speed loop when the second gain is selected for C-axis
gain delay cutting.
advance item When this parameter is set to "0", PI control
for cutting on is applied.
C-axis
Third speed Set the speed loop proportional gain when
loop gain the third gain is selected for C-axis cutting.
proportional
item for
cutting on
C-axis
Third speed Set the speed loop integral gain when the
loop gain third gain is selected for C-axis cutting.
integral item
for cutting on
C-axis
Third speed Set the speed loop delay advance gain
loop gain when the third gain is selected for C-axis
delay cutting.
advance item When this parameter is set to "0", PI control
for cutting on is applied.
C-axis
Speed loop Set the speed loop proportional gain when
gain propor- C-axis cutting is stopped.
tional item for
stop of
cutting on
C-axis
Speed loop Set the speed loop integral gain when
gain integral C-axis cutting is stopped.
item for stop
of cutting on
C-axis
Speed loop Set the speed loop delay advance gain
gain delay when C-axis cutting is stopped.
advance item When this parameter is set to "0", PI control
for stop of is applied.
cutting on
C-axis
222
Get other manuals https://www.bkmanuals.com
Details
Setting Standard
range setting
0 to 5000 60
(0.1 1/s)
0 to 5000 15
(0.1 1/s)
0 to 5000 63
(1/s)
0 to 5000 60
(0.1 1/s)
0 to 5000 15
(0.1 1/s)
0 to 5000 63
(1/s)
0 to 5000 60
(0.1 1/s)
0 to 5000 15
(0.1 1/s)