Mitsubishi Electric MELDAS C6 Parameter Manual page 294

# Item
26256 CURRENT LIMIT
26257 OFFSET
26258 OFFSET LIMIT
26259 DETECTION WIDTH
26260 CURRENT LIMIT 2
26261 CURRENT LIMIT 3
13. Indexing Axis Parameters
Details
Set current limit value when current limit value
command signal is ON.
Set the indexing position compensation amount.
If the indexing position compensation amount
exceeds this value, the "index position offset MAX
reached" signal (M:Y18E, L:Y100) will be output.
Set the tolerable width for outputting the
in-position signal when indexing is completed.
Set current limit value when current limit value
command 2 signal is ON.
Set current limit value when current limit value
command 3 signal is ON.
288
Get other manuals https://www.bkmanuals.com
Setting range
(unit)
0 to 100 (%)
-999.999 to
999.999
(mm)
0 to 999.999
(mm)
0 to 999.999
(mm)
0 to 100 (%)
0 to 100 (%)