Mitsubishi Electric MELDAS C6 Parameter Manual page 80

# Items
2030 Reference
dir (−)
(PR) point
direction (−)
2031 noref Axis without
reference
point
2032 nochk Whether
reference
point return
is completed
not checked
2037 G53ofs Reference
2038 point #1 to
#2_rfp
2039 #4
#3_rfp
2040
#4_rfp
6. Axis Specifications Parameters
6.2 Zero Point Return Parameters
Details
Set which side of the near-point dog the reference point
is at during reference point return.
<For dog type reference point return>
Direction in which zero point is established
as viewed from the near-point dog
Negative
direction
dir(-)=0
dir(-)=1
Specify the axis that does not have a reference point.
Before automatic operation starts, reference point
return is not required.
The absolute and incremental commands can be
executed even if dog type (or Z phase pulse system)
reference point return is not completed.
Specify whether to check that the reference point return
is completed.
Set up the position of the first, second, third, and fourth
reference points from the zero point of the basic
mechanical coordinates.
Basic machine coordinates
Reference point #1
Reference point #2
Reference point #3
74
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0: Positive
1: Negative
Positive
direction
0: Normal
1: Axis without
0: Checks
1: Does not check
±999999.999
(mm)
M
Reference point #4
direction
direction
controlled axis
reference point
reference point
return
completion.
reference point
return
completion.