Mitsubishi Electric MELDAS C6 Parameter Manual page 34

# Items
1105 T_Sel2 Tool
selection
method 2
1106 Tcount Life manage-
(For L ment count
system
only)
1107 Tllfsc Split life
(For L management
system display
only) screen
1108 TlrectM Life manage-
(For L ment
system re-count M
only) code
1109 subs_ Validate
(PR) M alternate M
code
1110 M96_M M96
alternate M
code
1111 M97_M M97
alternate M
code
1112 S_TRG Validate
(PR) status trigger
system
1113 INT_2 Validate
(PR) interrupt
method type
2
5. Base Specifications Parameters
Details
Select the tool selection method for when "#1103
T_Life" is set to 1.
0: Select in order of registered No. from the tools
used in the same group.
1: Select the tool with the longest remaining life
from tools used in the same group and the
unused tools.
Specify the function when address N is omitted when
inputting data (G10 L3 command) for tool life manage-
ment function ll.
Set up the number of groups to be displayed on the
tool life management II (lathe system) screen.
0: Displayed group count 1
1: Displayed group count 2
2: Displayed group count 4
Set up the M code for tool life management II (lathe
system) re-count.
Select the user macro interrupt with the substitute M
code.
Specify an M code to replace M96 when "#1109
subs_M" is set to 1.
Specify an M code to replace M97 when "#1109
subs_M" is set to 1.
Specify the validity conditions for the user macro
interrupt signal.
0: Valid when interrupt signal (UIT) turns off to on.
1: Valid when interrupt signal (UIT) is ON.
Specify the movement after user macro interrupt
signal (UIT) input.
0: Execute interrupt program without waiting for
block being executed to end.
1: Execute interrupt program after completing block
being executed.
28
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0/1
0: Time specified
input
1: No. of times
specified input
0 to 2
0 to 99
0: Alternate M
code invalid
1: Alternate M
code valid
3 to 97
(excluding 30)
0: Valid when
interrupt signal
(UIT) turns off
to on.
1: Valid when
interrupt signal
(UIT) is ON.
0/1