Mitsubishi Electric MELDAS C6 Parameter Manual page 56

# Items
1228 aux12 Switch
(bit0) coordinate
value screen
aux12 Switch offset
(bit1) and
parameter
screen
aux12 Switch data
(bit2) protection in
data
transmission
mode
aux12 Nose R
(bit3) specification
aux12 Select
(bit4) operation
error or stop
code
aux12 Select
(bit5) constant
surface
speed
coordinates
aux12 Switch
(bit6) relative
values
displayed
aux12 Protection
(bit7) with manual
value
command
1229 set01 Subprogram
(bit0) interrupt
set01 Accurate
(bit1) thread
cutting E
5. Base Specifications Parameters
Details
Set up this option to switch the coordinate value
screen.
0: 80-character screen
1: 40-character screen
Set up this option to switch the offset and parameter
screen to the parameter screen.
0: Displays the offset and parameter screen.
1: Displays the parameter screen.
Set up the range of data protection in data transmission
mode.
0: Protects both send and receive data.
1: Protects receive data only.
Select whether to specify the nose R compensation by
shape or wear number.
0: Specifies the nose R compensation by shape
number.
1: Specifies the nose R compensation by wear
number.
Specify both block cutting start interlock and cutting
start interlock as the operation error or stop code.
0: Operation error
1: Stop code
Select constant surface speed coordinates.
0: Workpiece coordinate value
1: Absolute coordinate value
0: Includes coordinate preset amounts in relative
values (absolute values).
1: Does not coordinate preset amounts in relative
values (absolute values).
Set up this option to protect a manual value command.
0: Does not protect the manual value command
(same as before).
1: Protects the manual value command.
0: Specifies the user macro interrupt of macro type.
1: Specifies the user macro interrupt of sub-program
type.
0: Address E specifies the number of threads per inch
for inch screw cutting.
1: Address E specifies precise reading for inch screw
cutting.
50
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1