Mitsubishi Electric MELDAS C6 Parameter Manual page 174

(c) Setting the output scale
When "0" is set, the output will be made with the standard output unit. To change the output unit,
set a value other than "0".
The scale is set with a 1/256 unit. When 256 is set, the unit will be the same as the standard
output.
# No.
2263 SV063 DA1MPY
2264 SV064 DA2MPY
(Example 1) When SV061 = 5, SV063 = 2560
The V-phase current value will be output with 1 A/V unit to D/A output ch.1.
(Example 2) When SV063 = 11, SV064 = 128
The position droop will be output with a 2mm/Vunit to D/A output ch.2.
7. Servo Parameters
7.4 Supplement
Abbrev Parameter name
D/A output channel 1
output scale
D/A output channel 2
output scale
168
Get other manuals https://www.bkmanuals.com