Program Example - Mitsubishi Electric NZ2GFCF-D62PD2 User Manual

9.3

Program Example

(1) System configuration
Master station (Station No.0)
For the settings using an engineering tool, the procedure is described based on the use of GX Works2.
(a) Link device assignment
Master station (Station No.0)
CPU module
Device X
X1000 to X104F
X1050 to X105F
Device Y
Y1000 to Y104F
Y1050 to Y105F
Device W
W3E8 to W427
Device W
W44C to W48B
Power supply module (Q62P)
CPU module (Q10UDHCPU)
Master/local module (QJ71GF11-T2)
Input module (QX40)
Input module (QX40)
Remote device station (Station No.1)
Remote device station (Station No.1)
Main module
(high-speed counter input)
Master module
Remote input RX Remote input RX
RX00 to RX4F RX00 to RX4F
RX50 to RX5F RX50 to RX5F
Remote output RY Remote output RY
RY00 to RY4F RY00 to RY4F
RY50 to RY5F RY50 to RY5F
Remote register Remote register
RWw0 to 3F RWw0 to 3F
Remote register Remote register
RWr0 to 3F RWr0 to 3F
CHAPTER 9 PROGRAMMING
High-speed counter module
(NZ2GFCF-D62PD2)
Extension output module
(NZ2EX2B1-16T)
Extension module 1
(digital output)
Remote output RY
RY50 to 5F
When the cam switch function is
used, the external output signal
controlled by a main module cannot
be controlled by the master station.
9
195