Table of Contents
Advertisement
12.
Set "Parameter write" for "Method selection".
13.
Set "Write Value". The following are the procedure.
• Click the title cell of "Read Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values.
14.
Click the [Execute] button and the following window is displayed.
15.
Click the [Yes] button.
16.
The parameter is written to the high-speed counter module.
The module parameter setting of the slave station is now completed.
94
Advertisement
Table of Contents
Troubleshooting
