Table of Contents
Advertisement
(11)Program example of the rotation speed measurement mode
Start remote register initial settings.
Turn on Initial data processing
completion flag.
Turn off Initial data processing
completion flag.
CH1 Time unit setting
(Rotation speed measurement)
CH1 Moving average count
(Rotation speed measurement)
CH1 Number of pulses per rotation
Set the values to the remote register.
CH1 Rotation speed measurement start
CH1 Rotation speed measurement stop
Read CH1 Measured rotation speed
value to D1126 to D1127.
Turn on CH1 Update flag reset command
(Measured rotation speed value).
Turn off CH1 Update flag reset command
(Measured rotation speed value).
216
Advertisement
Table of Contents
Troubleshooting
