Mitsubishi Electric NZ2GFCF-D62PD2 User Manual page 228

Error code
Classification
(hexadecimal)
0110
Moderate error
H
0120
Moderate error
H
0130
Moderate error
H
226
Description and
Error name
cause
Non-volatile The module operation
memory data error information stored in
(module operation the nonvolatile
information) memory is abnormal.
The parameter data
Non-volatile
stored in the
memory data error
nonvolatile memory
(parameter)
are abnormal.
Non-volatile The extended
memory data error parameter data stored
(Extended in the nonvolatile
parameter) memory are abnormal.
Operation of when an error
occurs
The other
Error CH
CHs
*16
*13
*13
Action
• Initialize the module
operation information in the
nonvolatile memory by setting
Module operation information
initialization command
(address: 1004 ) to Not
H
commanded (0) 
Commanded (1)  Not
commanded (0). Note that
the number of ON times
integration value is initialized
to 0.
• Take measures against noise,
such as using a shielded
cable for connection.
• If the same error occurs
again, a module failure may
be the cause. Please consult
your local Mitsubishi
representative.
• Set the parameters in the
nonvolatile memory to the
default values by setting
Parameter area initialization
command (address: 1002 )
H
to Not commanded (0) 
Commanded (1)  Not
commanded (0).
• Set the parameters again.
• Take measures against noise,
such as using a shielded
cable for connection.
• If the same error occurs
again, a module failure may
be the cause. Please consult
your local Mitsubishi
representative.
• Set the parameters in the
nonvolatile memory to the
default values by setting
Parameter area initialization
command (address: 1002 )
H
to Not commanded (0) 
Commanded (1)  Not
commanded (0).
• Set the parameters again.
• Take measures against noise,
such as using a shielded
cable for connection.
• If the same error occurs
again, a module failure may
be the cause. Please consult
your local Mitsubishi
representative.