Mitsubishi Electric NZ2GFCF-D62PD2 User Manual page 45

Remote register (RWr) signal direction: High-speed
counter module  Master/local module
Device
number
RWr1E
CH1 Measured pulse value (Latch counter input
terminal)
RWr1F
RWr20 CH1 Status
RWr21 CH1 External input status
RWr22 CH1 Latest error code
RWr23 CH1 Latest warning code
RWr24 Use prohibited
RWr25 Use prohibited
RWr26 Use prohibited
RWr27 Use prohibited
RWr28
CH2 Present value
RWr29
RWr2A
CH2 Latch count value/Sampling count
value/Periodic pulse count, difference value
RWr2B
RWr2C
CH2 Periodic pulse count, present value
RWr2D
RWr2E
CH2 Periodic pulse count value update check
RWr2F
RWr30
CH2 Latch count value (Latch counter input terminal)
RWr31
RWr32
CH2 Measured frequency value/Measured rotation
speed value
RWr33
RWr34
CH2 Measured pulse value (Function input terminal)
RWr35
RWr36
CH2 Measured pulse value (Latch counter input
terminal)
RWr37
RWr38 CH2 Status
RWr39 CH2 External input status
RWr3A CH2 Latest error code
RWr3B CH2 Latest warning code
RWr3C Use prohibited
RWr3D Use prohibited
RWr3E Use prohibited
*1
Use prohibited
RWr3F
*1 RWr3F and RWw3F are used for the system in the synchronous communication mode.
Do not read or write the data to/from any "Use prohibited" remote registers. If the data is read or written from/to any of the
registers, correct operation of the module cannot be guaranteed.
The remote register information is not stored in the nonvolatile memory of the high-speed counter module. Thus, the remote
register information is initialized by turning off then on the power supply of the high-speed counter module.
Description
Remote register (RWw) signal direction: Master/local
module  High-speed counter module
Device
number
RWw1E
CH1 ON width setting (PWM output)
RWw1F
RWw20
CH1 Cycle setting (PWM output)
RWw21
RWw22 Use prohibited
RWw23 Use prohibited
RWw24 Use prohibited
RWw25 Use prohibited
RWw26 Use prohibited
RWw27 Use prohibited
RWw28
CH2 Ring counter lower limit value
RWw29
RWw2A
CH2 Ring counter upper limit value
RWw2B
RWw2C
CH2 Preset value setting
RWw2D
CH2 Time unit setting (Sampling counter/Periodic
RWw2E
pulse counter)
CH2 Cycle setting (Sampling counter/Periodic pulse
RWw2F
counter)
CH2 Time unit setting (Frequency
RWw30
measurement/Rotation speed measurement)
CH2 Moving average count (Frequency
RWw31
measurement/Rotation speed measurement)
RWw32
CH2 Number of pulses per rotation
RWw33
RWw34 Use prohibited
RWw35 CH2 PWM output assignment setting
RWw36
CH2 ON width setting (PWM output)
RWw37
RWw38
CH2 Cycle setting (PWM output)
RWw39
RWw3A Use prohibited
RWw3B Use prohibited
RWw3C Use prohibited
RWw3D Use prohibited
RWw3E Use prohibited
*1
Use prohibited
RWw3F
CHAPTER 3 SPECIFICATIONS
Description
43
3