Chapter 7 Various Settings; Parameter Setting - Mitsubishi Electric NZ2GFCF-D62PD2 User Manual

CHAPTER 7
This chapter describes the setting procedures of the high-speed counter module.
7.1

Parameter Setting

Set the parameter of this module with the network parameter written to the CPU module of the master station. For the
setting procedure of the master station, refer to the following.
 User's manual for the master/local module used
Remark
● Check "Set the network configuration settings in CC IE Field configuration window" on the "MELSECNET/CC IE/Ethernet
Module Configuration" window in advance.
● To select an extension module in the "CC IE Field Configuration" window, select the following models from the "Module
List" window.
Input module
Output module
● When points less than the ones of the high-speed counter module and extension module are set for the remote I/O signal
and remote register, no error occurs. The cyclic transmission is performed for the data of the points set from the start.
84
VARIOUS SETTINGS
Extension module type Name
NZ2EX-16(DI)
NZ2EX-16(DO)