Introduction - Mitsubishi Electric NZ2GFCF-D62PD2 User Manual

Thank you for purchasing the CC-Link IE Field Network high-speed counter module (hereafter abbreviated as high-
speed counter module).
This manual describes the operating procedure, system configuration, parameter settings, functions, and
troubleshooting of the high-speed counter module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the high-speed counter module to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and
confirm that it will not cause system control problems.
 Target module: NZ2GFCF-D62PD2
Remark
Unless otherwise specified, this manual describes the program examples in which the remote I/O signals and remote
registers are assigned for a high-speed counter module as follows.
• Remote input signal: RX00 to RX4F
• Remote output signal: RY00 to RY4F
• Remote register: RWr0 to RWr3F, RWw0 to RWw3F
For the assignment of remote I/O signals and remote registers, refer to the following.
 User's manual for the master/local module used
6

INTRODUCTION