Panorama Tracking; Link Channels By Calibration - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

Sensitivity
The higher the value is, the easier the alarm will be triggered.
Upload Vandal-proof Alarm
The device uploads the alarm information when the alarm is triggered.
Vandal-proof Alarm Voice Warning
The device triggers the alarm with audible warning.
6. Click Save.
What to do next
If you lost direction when operating the device, you can click Point to North to call the north
position that is saved in the device.

4.15 Panorama Tracking

This function links panoramic channel with PTZ channel through calibration. The PTZ channel tracks
moving objects in panoramic channel and automatically adjusts its PTZ positions to keep the target
in the center of PTZ view for more details.
Note
This function is only supported by certain device models.

4.15.1 Link Channels by Calibration

Calibrate the panoramic channel and the PTZ channel to establish the link.
Steps
1. Go to Configuration → PTZ → Panorama Tracking .
2. Click Calibration.
3. Calibrate the channels automatically.
1) Select the Calibration Mode as Auto (Fast).
2) Adjust the PTZ positions of the two channels and make the centers of the two channels at
approximately the same position.
3) Click Start Calibration.
The device starts calibration automatically.
4. Optional: If automatic calibration fails, you can use the manual calibration.
1) Select the Calibration Mode as Manual.
2) Select a calibration point in Calibration Parameter list.
A numbered green cross is displayed on the panoramic image. You can drag the green cross to
adjust its position.
3) Click Add to save the cross position in the panoramic channel.
TandemVu PTZ Camera User Manual
54